Reliable Helper for your Daily Tasks
Spectra-Melt Complementary Materials
Spectra-Melt Complementary Materials range from cleaner to primer products and have been developed to support you as best as possible.
With our Spectra-Melt cleaning range the removal of hot melt adhesive from tanks, hoses and equipment becomes childplay.
Thus, LPMS cleaning products help customers to optimise machine efficiency, reduce down time and prevent internal contamination that can result in blocked nozzles and viscosity inconsistencies.
LPMS Melt Tank Instruction
Cleaning the melt tank is critical for successful operations. It is recommended to be done every 80-300 hours of heat cycles (depending on the consumption of materials. Higher consumption will decrease the interval). The LPMS Melt Tank Instruction provides a step by step assistance in order to secure a successful cleaning of your melt tank.
Spectra-Melt
Complementary Materials
SPECTRA-MELT Complementary Materials
OMEGA PURGE 200
SPECTRA-MELT OMEGA PURGE 200 is a thermoplastic hotmelt polyamide resin used for purging tanks, hoses and equipment to remove loose carbon particles (char) or when a resin color change is necessary. The material is used for purge only and is not a reactive cleaner.
SPECTRA-MELT Complementary Materials
OMEGA PURGE 225
SPECTRA-MELT OMEGA PURGE 225 is a thermoplastic hotmelt polyamide resin used for purging tanks, hoses and equipment to remove loose carbon particles (char) or when a resin color change is necessary. The material is used for purge only and is not a reactive cleaner.
SPECTRA-MELT Complementary Materials
EPSILON MELT TANK CLEANER
The technical and safety data instructions for the Epsilon Melt Tank Cleaner help customers to maximise the safety of their tank cleaning process.
SPECTRA-MELT Complementary Materials
OMEGA RELEASE
Silicone and Phthalate free single component solvent based release system with low VOC. Ideal for low pressure molding to assist in easily removing parts from tooling with strong high temperature stability. Available in brush on and aerosol kits.
SPECTRA-MELT Complementary Materials
PRIMER 362 / CURATIVE 362
Two component adhesive system to promote adhesion, especially suited for automotive, medical and hi-temperature industrial applications.
SPECTRA-MELT Complementary Materials
VertecBio ELSOL XR
VertecBio™ ELSOL® XR is a patented, bio-based and versatile solvent blend for formulations. Its better cleaning performance and lower solvent consumption make it the optimal replacement for xylene.
LPMS USA’s Spectra-Melt line of molding products incorporates cutting-edge additives and low-density fillers to enhance materials’ properties.
Further Topics
Cost Savings Calculator
Our low pressure molding solutions open up great savings opportunities for you. Use our cost savings calculator to identify your individual savings potential.
Get in Touch
LPMS USA
1441 Branding Lane, Suite 110
Downers Grove, IL 60515 USA
Tel: +1 (800) 353-7773
Application Checklist
Tell us about your project, and an LPMS USA representative will contact you directly